The machine for production of spliterny Komanch-4 blocks the Code: 00004
- Customer pickup,
- Courier
- In detail
Acquisition by installments is possible!
Vibroinstallation of Komanch is intended for production of wall stones, blocks, slag stones, keramzitoblok by a vibropressing method.
Mission
Vibroinstallation of Komanch is intended for production of wall stones, blocks, slag stones, keramzitoblok by a vibropressing method. 4 blocks are at the same time manufactured by the sizes of 390х190х190 mm.
Some advantages of a vibrating press of Komanch-4
food from 220 V;
simplicity and reliability;
high efficiency;
simplicity of service and repair;
very high self-sufficiency;
folding option;
low price.
Characteristics of the equipment Productivity are the 200th blocks/hour
Rated capacity of the electric drive is 0,7 kW
Supply voltage of 220 V
Weight is 100 kg
Length is 1200 mm
Width is 870 mm
Height is 1570 mm
Installation of Komanch is specially created for production of wall blocks in private conditions for own construction, and also for commercial production in small business.
Installation allows to release standard wall blocks 390 mm long, 188 mm high and 190 wide.
Configuration of installation is calculated on convenience of work of the operator, is very ergonomic, reliable and simple. The similar machines released by other producers, as a rule, are more bulky, at them productivity is lower though the price is higher.
Besides — at intensive operation and natural depreciation of installation, very just in any conditions (only welding and the Bulgarian is necessary!) to make necessary repair. In daily operation installation demands to keep only its working surfaces clean and greasing.
Theoretical productivity of the machine is up to 200 blocks an hour. Practically — usually to 1200 blocks in change at 2 operators who make a full cycle of all works on the platform. At three operators productivity increases up to 1800 blocks a day
The vibrating press Makes up to 2000 blocks a day for production of Komanch-4 blocks!
On this model two vibrators on 0:35 KW are installed that considerably increases the mix pressing speed, quality of the manufactured blocks and their durability
Products type
(keramzitoblok, slag stones, opilkoblok, peskoblok, delamitoblok) blocks construction from 30% hollowness,
390x190x188 (20х20х40) GOST 6133-84
· Working tension of the vibromachine: 220B
· Vibrator power: 0,35 KW - 2 pieces.
· Overall dimensions of the vibromachine (D*Sh*V): 100*110*140 cm.
Weight is 100 kg.
Payback of 10-20 days.
Training of personnel 20-30min.
Installation of the equipment. 30-40 min.
Maintainability nothing to break
Convenience of transportation 1,0m3
The recommended compounding of compositions of working mix depending on a type of the block and a trot.plitka is FREE OF CHARGE applied to our installations.
Vibrating press it welcome the best machine of the present. It left in 2010 and at once blew up the markets.
Magnificent installation for blocks is appreciated by our clients, considering huge sales in recent years!
The machine for blocks is suitable not only for private application (building of the house, garage), but also for mass production of blocks with their subsequent realization.
This smallest machine in production is quite capable to compete on productivity and quality of the released blocks with other more expensive.
Advantages:
SIMPLICITY in development and application
HIGH profitability
The principle of operation of the device for production of slag stones:
Loading of the machine:
Alignment of the laid mix in the machine a trowel to the necessary level
We turn on the vibrator for 20 - 60 seconds depending on composition of concrete mix after the clamping frame rose against the stop we lift a matrix and we switch-off the vibrator it is reached by practical consideration in the course of work;
The block is ready,-... following!
Why you will not be disappointed upon purchase of the Vibrating press from us?
Extremely fast delivery to Kazakhstan
Free shipping!
The mix compounding for preparation of blocks is FREE OF CHARGE applied in a machine set!
FAST payback
OPERATION in living conditions
SERVICE of installation and its repair by own efforts
DOES NOT DEMAND special professional skills
Slag stone is a construction shlakobetonny material, is intended for construction of walls of buildings and constructions.
Production of slag stones is a technological process of receiving finished products (slag stones) of initial materials (slag, cement, water).
Big distribution of production of slag stones is reasonable a possibility of use of any available bulks which are capable to contact cement, for example sand, elimination, a granite and marble crumb and t.p
Production technology of slag stones:
- preparation of shlakobetonny mix
- transportation of ready mix in a vibrating press matrix
- pressing of slag stones
- a raspalubka and drying of the made products
- warehousing and packing of slag stones
Characteristics| The main | |
|---|---|
| Country producer | Russia |
| State | New |
| Additional service | Training, Service |
| Production: | Keramzitoblokov, Peskoblokov, Wall blocks, Slag stones |
| Management | Mechanical (manual) |
| Productivity of production of keramzitoblok | 160.0 (piece/hour) |
| Productivity of production of peskoblok | 160.0 (piece/hour) |
| Productivity of production of heatblocks | 160.0 (piece/hour) |
| Productivity of production of thermoblocks | 160.0 (piece/hour) |
| Productivity of production of slag stones | 160.0 (piece/hour) |
| Power consumption | 1.0 (kW) |
| The occupied space | 2.0 (sq.m) |
| Number of service personnel | 1 (people) |
| Warranty period | 12 (months) |